{"id":44711,"date":"2026-06-22T03:44:53","date_gmt":"2026-06-22T03:44:53","guid":{"rendered":"https:\/\/woodmart\/product\/xgecu-t56-universal-programmer-51-adapters-for-spi-nand-flash-emmc"},"modified":"2026-06-25T09:29:29","modified_gmt":"2026-06-25T09:29:29","slug":"xgecu-t56-universal-programmer-51-adapters-for-spi-nand-flash-emmc","status":"publish","type":"product","link":"https:\/\/www.storevaluer.com\/fr\/produit\/xgecu-t56-universal-programmer-51-adapters-for-spi-nand-flash-emmc","title":{"rendered":"XGecu T56 Universal Programmer +51 Adapters for SPI NAND Flash\/EMMC"},"content":{"rendered":"

XGecu T56 Universal Programmer +51 Adapters\u00a024\/25\/26\/93 serial EEPROM, 27\/28\/29\/36\/37\/39\/49\/50 EPROM<\/h1>\n

XGecu T56 Programmer 56 pins\u00a0Super stability Low power consumption high speed and high voltage programming.<\/span><\/h2>\n

\"XGecu<\/span><\/p>\n

XGecu T56 Programmer Highlights:<\/h3>\n

1. The software interface is clear, smooth and easy to use, easy to upgrade software .<\/p>\n

2. Ultra-high cost performance, suitable for small batch programming below 5000 , also\u00a0suitable for developers and professional maintenance personnel<\/span>.<\/p>\n

3. Support Chip Models: 24\/25\/26\/93 serial EEPROM, 27\/28\/29\/36\/37\/39\/49\/50 EPROM, Paged EPROM,FLASH memory (NOR, NAND, SPI NAND, EMMC, NVRAM, SRAM, CPLD (GAL), etc.<\/p>\n

4. Support package: add DIP42\/ PLCC44\/ SOP44\/ QFP44\/ TSOP48\/ TSOP56\/ BGA48\/ BGA63\/ BGA64 \/ BGA100\/ BGA153\/ BGA162\/ BGA169\/ BGA221 on the basis of TL866II.<\/p>\n

5. NAND EMMC supports maximum capacity\u00a0up to 256G.<\/span><\/span><\/p>\n

6. Support high voltage, the highest voltage reaches 25.0V:<\/p>\n

    \n
  • The T56 programmer solves the contradiction between high voltage and high frequency pins. It supports high speed and high voltage programming<\/span>.<\/li>\n
  • You can directly program many 27C series and MCU series that require high voltage VCC (6.5V) and VPP (12V-25V).<\/li>\n<\/ul>\n

    7. High-performance with Optimal design of software and hardware:<\/p>\n

      \n
    • For high-capacity chips, the T56 programmer meets or exceeds the speed of most specialized programmers.<\/li>\n
    • Stability and reliability of the programmer\u00a0are the most important .<\/li>\n<\/ul>\n

      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0If the main controller of the programmer can work at a higher speed, its stability and speed determined by the highest operating frequency supported by the pins. The higher frequency, the better of anti-interference ability.<\/span><\/p>\n

        \n
      • The T56 pin tested with the frequency is as high as 70MHZ. The pin operating frequency is more than 3 times that of many similar programmers. This is the main reason why the T56 can work reliably at a very high speed for large-capacity high-speed chips.<\/li>\n
      • T56 almost reaches the limit speed of USB2.0 (HS 480MHZ) transmission when reading EMMC large-capacity chip.<\/li>\n<\/ul>\n

        8. High-speed programming of a SPI NAND FLASH:<\/p>\n

        SPI NAND Flash has a wide range of applications in mobile devices, set-top boxes, data cards, TVs, etc. It is compatible with flash pins of different capacities and uses a smaller package (WSON8 is typical).<\/p>\n

        The function of SPI NAND:<\/h3>\n
          \n
        • Support OTP programming<\/li>\n
        • \u00a0Support internal ECC on\/off function<\/li>\n
        • \u00a0Support UID (unique signature) reading<\/li>\n
        • \u00a0Support multiple file operations<\/li>\n
        • \u00a0Support NAND parameter custom function, (new chips can be added by custom parameters)<\/li>\n
        • \u00a0Reserved custom interface to provide free technical support for bad block management and ECC algorithm.\u00a0we can customize according to user requirements.<\/li>\n
        • The programming clock speed is adjustable<\/span>.<\/li>\n
        • Support QUAD X4 or SPI X1 mode.<\/li>\n
        • Support ISP\u00a0 programming in X1 mode (ISP reaches 4M bytes\/second).<\/li>\n<\/ul>\n

          SPI NAND is generally a chip of 1Gb-4Gb capacity. To read and write full data of 1Gb chip, T56 only needs 12s+13s=25 seconds. More than 10 times the speed of some similar products.(High-speed programming without using a special adapter<\/span>.)<\/p>\n

          XGecu T56 Programmer Functions:<\/h3>\n

          1. Programming MT29F2G01ABAFD\u00a0 with full datas. only 27S + 31S<\/span><\/h4>\n

          \"XGecu<\/strong><\/span><\/p>\n

          2. High-speed programming of a Parallel NAND FLASH:<\/h4>\n

          Functions of Parallel NAND for Parallel:<\/p>\n

            \n
          • Support OTP programming<\/li>\n
          • Automatic Indentification supported by ONFI standard<\/li>\n
          • Support UID (unique signature) reading<\/li>\n
          • Support multiple file operations<\/li>\n
          • Support NAND parameter custom function, (new chips can be added by custom parameters)<\/li>\n
          • Reserved custom interface to provide free technical support for bad block management and ECC algorithm. We can customize<\/span> according to user requirements.<\/li>\n
          • The programming clock is adjustable.<\/li>\n<\/ul>\n

            Parallel NAND capacity can reach more than 256Gb, and the highest speed of T56 can reach 2-5 times the speed of some similar products.<\/strong><\/p>\n

            \"XGecu<\/strong><\/span><\/p>\n

            3. EMMC programming function special introduction:<\/span><\/h4>\n

            The most functions EMMC programmer, which can perform one-key mass production operation on EMMC (also can be programmed with\u00a0\u00a04 machines in one computer)Load project files, load all parameter settings at once, and directly program. Read and write speeds up to 12MB \/ s-45MB \/ s.<\/span><\/p>\n

            EMMC function introduction:<\/span><\/strong><\/p>\n

            Analysis function : analyze the content of the original chip, and display the following results:<\/span><\/span><\/p>\n

              \n
            • Display chip manufacturing information<\/span><\/span><\/li>\n
            • Visual display of chip usage up to 8 partitions<\/span><\/span><\/li>\n
            • Each partition shows whether it is write protected, can be read, can be rewritten or deleted<\/span><\/span><\/li>\n
            • Shows whether the entire chip is temporarily or permanently write protected<\/li>\n
            • Show whether the chip is password protected<\/span><\/span><\/li>\n
            • Show whether the chip uses a 32-bit security authentication code to write to the RPMB.<\/span><\/span><\/li>\n
            • Show other important parameters of ECSD\/CSD\/CID<\/span><\/span><\/li>\n<\/ul>\n

              <\/span>Read\/write functions (all functions can be completed with one-key)<\/span><\/strong><\/span><\/p>\n

                \n
              • Read CID \/ CSD \/ ECSD.<\/li>\n
              • Clear full-chip temporary write protection before programming<\/span><\/span><\/li>\n
              • Clear temporary write protection groups before programming<\/span><\/span><\/li>\n
              • Delete chip before programming<\/span><\/span><\/li>\n
              • Blank Check the chip before programming<\/span><\/span><\/li>\n
              • Programming\u00a032-bit\u00a0\u00a0authentication key<\/span><\/span><\/li>\n
              • Perform chip password verification<\/span><\/span><\/li>\n
              • Partiton Config<\/span><\/span><\/li>\n
              • Read and Programming\u00a0to BOOT1<\/li>\n
              • Read and Programming\u00a0to BOOT2<\/span><\/span><\/li>\n
              • Read and Programming\u00a0to RPMB<\/span><\/span><\/li>\n
              • Read and Programming\u00a0to GP1<\/span><\/span><\/li>\n
              • Read and Programming\u00a0to GP2<\/span><\/span><\/li>\n
              • Read and Programming\u00a0to GP3<\/span><\/span><\/li>\n
              • Read and Programming\u00a0to GP4<\/span><\/span><\/li>\n
              • Read and Programming\u00a0user data (User Area)<\/span><\/span><\/li>\n
              • Setting\u00a0 temporary write protection groups<\/span><\/span><\/li>\n
              • Setting\u00a0 permanent write protection groups<\/span><\/span><\/li>\n
              • Setting\u00a0password (or reset password)<\/span><\/span><\/li>\n
              • Programming ECSD<\/span><\/span><\/li>\n
              • Programming CSD<\/span><\/span><\/li>\n
              • Automatically verify all the above operations after Programming<\/li>\n<\/ul>\n

                ISP\u00a0in-circuit programming\u00a0function:<\/span><\/strong>
                <\/span><\/p>\n

                  \n
                • Ultra-high stability ISP in-circuit programming, wire length can be up to 25CM, working frequency 25MHZ, reliable work,\u00a0<\/span><\/span>If the length is within 10CM, it can be operated at 40-50MHZ.<\/li>\n
                • ISP can also use 4-bit mode, the operation speed is increased to 4 times.<\/span><\/span><\/li>\n<\/ul>\n

                  EMMC other functions:<\/span><\/strong>
                  <\/span><\/p>\n

                    \n
                  • The working frequency and working voltage of EMMC can be adjusted manually.<\/span><\/span><\/li>\n
                  • The user area data can be read and written in multiple files.<\/span><\/span><\/li>\n
                  • If there is a password when Erase, will do Force Erase.<\/span><\/span><\/li>\n
                  • Password can use ordinary password or SHA1 encrypted password.<\/li>\n
                  • The value of ECSD \/ CSD can be loaded from the ECSD_CSD file or manually set by the user.<\/span><\/span><\/li>\n
                  • Ignore data CRC error during read operation.<\/li>\n
                  • Optional automatic verification after reading operation is completed.<\/span><\/span><\/li>\n
                  • The device information includes high-definition pin map and ISP wiring.<\/span><\/span><\/li>\n
                  • EMMC has real-time speed display during read and write operations, and the final average speed display.<\/span><\/span><\/li>\n<\/ul>\n

                    EMMC Adapter and ISP connection:<\/span><\/strong><\/p>\n

                    \"XGecu<\/p>\n

                    \"XGecu<\/p>\n

                    4. High-speed programming of Parallel NOR Flash 28\/29 series:<\/span><\/h4>\n

                    T56 can support up to 2Gb capacity of\u00a0Parallel NOR Flash 28\/29. and use one TSOP56 adapter.
                    Ordinary 48-pin programmer only support up to 256Mb and need 4 diffrent adapters.<\/span><\/p>\n

                    EXAMPLE: S29GL128P11TFI01<\/span><\/p>\n

                    \"XGecu<\/span><\/p>\n

                    XGecu T56 Universal Programmer Parameters:<\/span><\/h3>\n
                      \n
                    • 32-bit MCU 200MHZ + Xilinx SP6 FPGA structure, USB2.0 HS 480MHZ transmission<\/span><\/li>\n
                    • 56 pin full drive IO design. All pins have a maximum operating frequency of 50MHZ and high reliability.<\/span><\/li>\n
                    • Stable and reliable 8Pins in-circuit programming interface, the wire Lehgth is more than 30CM,and it can communicate reliably at 25MHZ.<\/span><\/li>\n<\/ul>\n

                      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a025 series \/ EMMC in-circuit programming with a maximum clock frequency of 40MHZ-50MHZ<\/span><\/p>\n

                        \n
                      • VCC voltage 1.2-6.5V 64 levels adjustable,<\/span><\/li>\n<\/ul>\n

                        \u00a0 \u00a0 \u00a0 \u00a0 \u00a0\u00a0VPP voltage 6.5-25V 64 levels adjustable.<\/span>
                        \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 IO communication signal voltage continuously adjustable 1.2V-3.6V<\/span>
                        \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 VCC 120MA-320MA overcurrent protection continuously adjustable.<\/span>
                        \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 VPP 120MA overcurrent protection.<\/span><\/p>\n

                          \n
                        • Power consumption: 5V <500MA. All chips do not need external power supply<\/span>.<\/span><\/li>\n<\/ul>\n

                          \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 It can be connected to an external power supply <\/span>5V-5.5V 500MA for multipile programming<\/span>.<\/span>
                          \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 The external power can be powered by a cell phone charger can be seen everywhere.<\/span>
                          \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 The programmer has multiple protections<\/span> for the external power supply:\u00a0<\/span>overvoltage protection \/ reverse connection protection \/ overcurrent protection \/ low voltage prompt.<\/span><\/p>\n

                            \n
                          • Write EMMC Speed: 12MB\/s-25MB\/s<\/span><\/li>\n<\/ul>\n

                            \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 Reading EMMC speed: 14MB\/s-45MB\/s is 2-5 times faster than<\/span> similar programmers.\u00a0<\/span>(This is important for large-capacity chips, 64GB EMMC chips, if\u00a0<\/span>10MB\/s (the average programmer cannot reach 10MB\/s) reading takes 6400 seconds,<\/span>T56 can usually reach more than 20MB\/s, as long as about 3000 seconds)<\/span>
                            \u00a0 \u00a0 \u00a0 \u00a0 \u00a0Ability to handle extremely high speeds, meaning that programmer hardware has greater stability at lower speeds.<\/span><\/p>\n

                              \n
                            • Open self-test function, self-check each VPP\/VCC \/GND\/IO<\/span><\/li>\n<\/ul>\n

                              56 Pins FULL DRIVE:<\/strong><\/p>\n

                                \n
                              • Compared with the general 48-pin universal programmer, the 56-pin full drive has 8 more universal IO ports. The advantage of the 56 universal drives is that the all chips below 56 pins only need one adapter<\/span> in the same package.<\/li>\n
                              • Example: A general TSOP56 adapter, which can program all\u00a0 of TSOP56, TSOP48, TSOP40, TSOP32 on the T56 programmer. one TSOP56 adapter is equivalent to the function of five adapters\u00a0of the ordinary 48-pin universal programmer<\/span>.<\/li>\n<\/ul>\n

                                \"XGecu<\/p>\n

                                <\/h3>\n

                                Packing List:
                                <\/span><\/span><\/h3>\n

                                1 * XGecu T56 universal programmer<\/span>
                                1 * TSOP56\/48\/40\/32 Adapter<\/span>
                                1 * ADP-SSO-056-0.8\u00a0 Adapter<\/span>
                                1 * TSOP48 Adapter<\/span>
                                1 * SOP44-DIP44 1.27mm (530mil) Adapter<\/span>
                                1 * SOP28-DIP28 (300mil) Adapter<\/span>
                                1 * SOP20-DIP20 (300mil) Adapter<\/span>
                                1 * SOP16-DIP16 (300mil) Adapter<\/span>
                                1 * Double SOP8-DIP16 CNV-SOP20 (208mil) Adapter<\/span>
                                1 * SOP8-DIP8 CNV-SOP20 (208mil) Adapter<\/span>
                                1 * SOP20-DIP20 CNV-SOP20 (208mil) Adapter<\/span>
                                1 * SOP8-DIP8 CNV-SOP-DIP16 (150mil) Adapter<\/span>
                                1 * SOP16-DIP16 CNV-SOP-DIP16 (150mil) Adapter<\/span>
                                1 * PLCC44-DIP44<\/span>
                                1 * PLCC44-DIP40<\/span>
                                1 * PLCC32-DIP32<\/span>
                                1 * PLCC28-DIP28<\/span>
                                1 * PLCC28-DIP24<\/span>
                                1 * PLCC20-DIP20<\/span>
                                1 * SSOP28 to DIP28<\/span>
                                1 * TSSOP8 to DIP8<\/span>
                                1 * KB9012 board<\/span>
                                1 * SOP8 IC Clip<\/span>
                                1 * ITE 29\/39\/49\/50 series 32\/40\/48 feet adapter<\/span>
                                1 * Multipurpose ISP-DuPont-Header Adapter<\/span>
                                1 * EC NPEC288 NPEC388 PCB Board<\/span>
                                1 * TSOP28Pin 0.65mm Adapter Board<\/span>
                                1 * SOP28Pin 1.27mm Adapter Board<\/span>
                                1 * TSOP20Pin 0.65mm Adapter Board<\/span>
                                1 * SOP20Pin 1.27mm Adapter Board<\/span>
                                1 * TSOP16Pin 0.65mm Adapter Board<\/span>
                                1 * SOP16Pin 1.27mm Adapter Board<\/span>
                                1 * TSOP14Pin 0.65mm Adapter Board<\/span>
                                1 * SOP14Pin 1.27mm Adapter Board<\/span>
                                1 * TSOP10Pin 0.65mm Adapter Board<\/span>
                                1 * SOP10Pin 1.27mm Adapter Board<\/span>
                                1 * TSOP8Pin 0.65mm Adapter Board<\/span>
                                1 * SOP8Pin 1.27mm Adapter Board<\/span>
                                1 * QFN8-DIP8 Programador Adapter WSON8-DIP8 8x6mm 6x5mm<\/span>
                                1 * SOP8\/MSOP8\/SSOP8\/SOP16-DIP16 simple Adapter<\/span>
                                1 * Adapter SOP8-DIP8 simples<\/span>
                                1 * 1.8V Conversion Block 25 series low voltage chip adapter<\/span>
                                1 * ICSP Cable<\/span>
                                1 * LCD LED screen EDID Cable<\/span>
                                1 * IC Chip Extractor<\/span>
                                1 * Suction Pen<\/span>
                                1 * USB Cable<\/span>
                                1 * VGA Cable<\/span>
                                1 * Anti-Static Wristband Wrist Strap Band ESD Discharge PC Electricity Grounding
                                <\/span><\/p>","protected":false},"excerpt":{"rendered":"

                                XGecu T56 Universal Programmer +51 Adapters\u00a024\/25\/26\/93 serial EEPROM, 27\/28\/29\/36\/37\/39\/49\/50 EPROM XGecu T56 Programmer 56 pins\u00a0Super stability Low power consumption high<\/p>","protected":false},"featured_media":44706,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[],"product_cat":[5149,4967,5745],"product_tag":[],"class_list":["post-44711","product","type-product","status-publish","has-post-thumbnail","product_cat-auto-key-programmer","product_cat-multi-brand","product_cat-universal","first","instock","shipping-taxable","purchasable","product-type-variable"],"_links":{"self":[{"href":"https:\/\/www.storevaluer.com\/fr\/wp-json\/wp\/v2\/product\/44711","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.storevaluer.com\/fr\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.storevaluer.com\/fr\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.storevaluer.com\/fr\/wp-json\/wp\/v2\/comments?post=44711"}],"version-history":[{"count":1,"href":"https:\/\/www.storevaluer.com\/fr\/wp-json\/wp\/v2\/product\/44711\/revisions"}],"predecessor-version":[{"id":54472,"href":"https:\/\/www.storevaluer.com\/fr\/wp-json\/wp\/v2\/product\/44711\/revisions\/54472"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.storevaluer.com\/fr\/wp-json\/wp\/v2\/media\/44706"}],"wp:attachment":[{"href":"https:\/\/www.storevaluer.com\/fr\/wp-json\/wp\/v2\/media?parent=44711"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.storevaluer.com\/fr\/wp-json\/wp\/v2\/product_brand?post=44711"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.storevaluer.com\/fr\/wp-json\/wp\/v2\/product_cat?post=44711"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.storevaluer.com\/fr\/wp-json\/wp\/v2\/product_tag?post=44711"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}